Re: La chiave di volta del 911
Inviato da m4x il 7/6/2011 7:34:23
"L'unica cosa che fa pozze di materiale fuso è appunto la termite"
Danilo Coppe.
"I didn't personally see molten steel at the World Trade Center site. It was reported to me by contractors we had been working with. Molten steel was encountered primarily during excavation of debris around the South Tower when large hydraulic excavators were digging trenches 2 to 4 meters deep into the compacted/burning debris pile. There are both video tape and still photos of the molten steel being "dipped" out by the buckets of excavators. I'm not sure where you can get a copy."
Mark Louizeux - 911Myths
http://www.youtube.com/watch?v=3SLIzSCt_cg
http://www.youtube.com/watch?v=hLCwq3-RzZs
"Various metals (most notably iron and lead) were melted during the WTC Event, producing spherical metallic particles."
RJ Lee Group - WTC Dust Signature Report
"A one-inch column has been reduced to half-inch thickness. Its edges–which are curled like a paper scroll–have been thinned to almost razor sharpness. Gaping holes–some larger than a silver dollar–let light shine through a formerly solid steel flange. This Swiss cheese appearance shocked all of the fire-wise professors, who expected to see distortion and bending–but not holes."
Appendix C - FEMA
7a. How could the steel have melted if the fires in the WTC towers weren’t hot enough to do so?
[...]
In no instance did NIST report that steel in the WTC towers melted due to the fires. The melting point of steel is about 1,500 degrees Celsius (2,800 degrees Fahrenheit). [...]. NIST reported maximum upper layer air temperatures of about 1,000 degrees Celsius (1,800 degrees Fahrenheit) in the WTC towers (for example, see NCSTAR 1, Figure 6-36).
[...]
12. Did the NIST investigation look for evidence of the WTC towers being brought down by controlled demolition? Was the steel tested for explosives or thermite residues? The combination of thermite and sulfur (called thermate) "slices through steel like a hot knife through butter."
NIST did not test for the residue of these compounds in the steel.
Qualcuno l'ha fatto...
http://www.youtube.com/watch?v=8_tf25lx_3o
PS - Se cambi il nome del topic in "sono un povero coglione" è IT
Danilo Coppe.
"I didn't personally see molten steel at the World Trade Center site. It was reported to me by contractors we had been working with. Molten steel was encountered primarily during excavation of debris around the South Tower when large hydraulic excavators were digging trenches 2 to 4 meters deep into the compacted/burning debris pile. There are both video tape and still photos of the molten steel being "dipped" out by the buckets of excavators. I'm not sure where you can get a copy."
Mark Louizeux - 911Myths
http://www.youtube.com/watch?v=3SLIzSCt_cg
http://www.youtube.com/watch?v=hLCwq3-RzZs
"Various metals (most notably iron and lead) were melted during the WTC Event, producing spherical metallic particles."
RJ Lee Group - WTC Dust Signature Report
"A one-inch column has been reduced to half-inch thickness. Its edges–which are curled like a paper scroll–have been thinned to almost razor sharpness. Gaping holes–some larger than a silver dollar–let light shine through a formerly solid steel flange. This Swiss cheese appearance shocked all of the fire-wise professors, who expected to see distortion and bending–but not holes."
Appendix C - FEMA
7a. How could the steel have melted if the fires in the WTC towers weren’t hot enough to do so?
[...]
In no instance did NIST report that steel in the WTC towers melted due to the fires. The melting point of steel is about 1,500 degrees Celsius (2,800 degrees Fahrenheit). [...]. NIST reported maximum upper layer air temperatures of about 1,000 degrees Celsius (1,800 degrees Fahrenheit) in the WTC towers (for example, see NCSTAR 1, Figure 6-36).
[...]
12. Did the NIST investigation look for evidence of the WTC towers being brought down by controlled demolition? Was the steel tested for explosives or thermite residues? The combination of thermite and sulfur (called thermate) "slices through steel like a hot knife through butter."
NIST did not test for the residue of these compounds in the steel.
Qualcuno l'ha fatto...
http://www.youtube.com/watch?v=8_tf25lx_3o
PS - Se cambi il nome del topic in "sono un povero coglione" è IT
Messaggio orinale: https://old.luogocomune.net/site/newbb/viewtopic.php?forum=7&topic_id=6365&post_id=195599